Labor efficiency and labor quality are the two most important performance measures for supervision of a service department. The way in which you measure labor efficiency leads you to be able to manage labor efficiency.  Detailed definitions and calculations, as well as tried and true methods to achieve high labor efficiency are the hallmarks of this program.

When employees are given specific direction the results are impressive. Without it, the results can be disastrous.  Billing efficiency, or the amount of time that can be billed versus paid, is not the same as labor efficiency. Labor efficiency is owned by the technician, but is directly influenced by the methods used to schedule work by the first level supervisor. This brings together inspections, job segmentation, standard jobs coding, and standard job times. Fundamentals of scheduling then can be applied and allow the performance of the work by a service department to become predictable.

Finally, the elements that interfere with good labor efficiency are exposed and suggestions developed for each so that they can be overcome. The customer will benefit greatly from predictable completion dates which will be the “intended” consequence of this program for all service management and supervision.

Customers, for the dealership service department, have grown used to performing service maintenance and minor repairs either themselves, or with the help of independent mechanics. This has led them to the conclusion that repairs are easily done and that they can diagnose problems with their equipment without much help from anybody.

While it is true that some of the customers, employees, and independent mechanics can perform very technical work, it still remains the dealership that has access to all the technical expertise that is provided by the manufacturers of the equipment.

The parallel that will be presented in this program is that of the doctor. The technician performing the inspection is a qualified analyst, trained to know what to look for and what the symptoms mean. The inspections that we are talking about here are diagnostic inspections to be performed prior to conducting any repairs, quality control inspections to be done after work has been completed, and machine appraisals which would be required of machines being traded in or being purchased used.

This program on inspections will provide you with an outline – a process – to follow in developing the inspection programs listed above for your dealership. This outline will allow you to improve all repair processes as well as have a more consistent condition report on used equipment.

Customers want to know how much the repair work will cost before they approve the job you will perform. We have to provide this important information. In order to do this, we must manage our repairs with job codes. We must determine standard jobs, and then track them every time we perform them. In this way, we can develop a “standard time” which is different than average time. You will learn the secrets of flat rating in this very detailed program.

The job code structure is where this begins. The manufacturers provide a job code for use with warranty jobs. This is the same logic that dealers must use to manage the repair and maintenance jobs. The code needs to be easy to understand and search out in a file or on a system. Once we have the job codes, then the inspections and job structures need to follow the same logic. How to develop the job codes and then utilize them to develop and manage history is a critical element of this program.

The determination of the standard time is also misunderstood by most. It is NOT about the average time to perform the job. Learn the perils of assuming all the risk on jobs, and how to provide for those risks with standard times. This program will be of value to anyone in management who wants to move away from a job shop structure.

In the service business, we communicate with the marketplace in a variety of methods. With the telephone, with people walking into your store, some customers and some use the internet. But the variations of the work don’t stop there: we also have to contend with a variety of “delivery” systems as well. These are not transportation systems. This is a customer service delivery system.

We process work orders for our customers and we all know that not all customers are created equal. Some customers spend a lot of money with you and deserve to get special treatment. Well, we also have some processes that are cost intensive but also some that are very efficient. These are the customer service delivery systems.

From the customer who does not know what is needed, to the customer with their own mechanics, there are wide ranges of differences. Each of the delivery systems has a different cost component, and that can lead us to provide differentiated services dependent on the delivery system that is chosen by the customer. We explore all aspects of the delivery systems we offer to the market in this important program.

All of the training and tooling in service, and the inventories and systems in parts, and all the good work by professional salesmen will be wasted if you cannot keep your customer for life. The Japanese taught us that in the 1970’s, and Harvard Business School did the definitive research in the 1980’s. This class deals with the facts of customer retention and “how to” minimize the number of customers that “defect” from your dealership.

The statistical impact of defection on profitability across differing Industry groups is exposed. It is shocking. In the Industrial Distribution business, if you can increase your customer retention 5%, then you can increase your profitability as a Company by 45%. There is no single element of what we do that has the impact on dealership profitability like customer retention. The tools you should use to minimize customer defection are discussed in detail in this impactful class. Everything that we do in the performance of our jobs is at risk if our responsiveness and convenience are not to the customers’ liking. Don’t miss out on this powerful program.

The ultimate measure of your service to customers is the loyalty that they give you with the business. That can be measured by customer retention. During the 1980’s Harvard Business School did the definitive research on this subject. That work was published in a book called the “Service profit Chain.” This is one of the foundations that is used in this class to show students the “how to” measure customer loyalty.

There is a direct correlation between employee satisfaction and loyalty and customer satisfaction and loyalty. This correlation is explored and explained in this program. Various surveys are exposed to measure employee satisfaction. This information provides recommendations for action.

The Construction Equipment Industry has conducted customer surveys every five years that asks customers about their buying habits. These surveys provided guidance to the dealers on what the percentage of defections would be in the Industry. This class provides a direct linkage that can be used on profitability related to customer retention by the parts business and the service business.

This Customer Loyalty class starts to address the retention measures to use when a customer is assigned to a specific employee. A customer assigned to a Product Support Salesmen has a retention goal, a customer loyalty goal, of 100%. The tools to perform this calculation are provided in this class.

One of the most important and significant activities in which we can be involved, in our professional lives, is helping in the development of the younger less experienced employees. Whether it is a direct coaching job or we mentor the younger less experienced workers we have a responsibility to transfer our knowledge to them. In older times each new employee was assigned to a “mentor” with whom they spent time. They would take breaks together, have lunch together, and this new employee worked as if they were helpers for the experienced employees.

The dilemma with this is that not everyone is good at transferring their knowledge and some employees will just not do it. Selecting the proper people to assign this responsibility is critical. Starting through all of the job functions, from the beginning to the end. Communicated in a different manner from the time the employee arrives at work until they leave at the end of the day. Everything and anything that pertains to the work.

This is part of developing a strong corporate culture. Culture is aimed at your heart. In this style of “onboarding” new employees, each person will feel part of the team. This is an extremely important function and this class will help you avoid the difficulties in performing this function.

Dealing with change is one of the biggest challenges we face in our lives. It will also be one of the largest challenges you face in creating value for customers and remain relevant in the supply chain. Jack Welsh is famous for saying “When the world around you is changing faster than you are…. the end is near.

Look around. Look what has happened in only just the past two decades; Cell Phones, Smart Appliances, Artificial Intelligence to name just a few. Look also at the changes in the equipment we support; computerization of componentry, telematics, etc. Now look at your business internally. What changes have you made in how you do things? This program covers all of these issues.

It is critical that we know how to lead through these periods of rapid change. We have to be able to communicate effectively. What are we doing? Why are we doing it? And how we get everyone committed to these changes is covered in detail in this comprehensive class.

Managers must understand how to engage their team, and lead the business, through change. You will learn how to effectively manage change, become consistent in identifying and resolving critical change issues and innovating in how you do the work and find new and different ways to grow is covered in detail. Don’t miss this important class.

In the service business we communicate with the marketplace in a variety of methods. We deal with various systems, manually and technologically. We have a responsibility to serve and retain customers while at the same time we have to make money for the business. This is a complicated business.

To assist us in managing the business and help us implement our company strategy we use a business tool that is called the “Balanced Scorecard.” The Balanced Scorecard was developed in the 1990s, designed for use in the planning and implementation of a company’s strategy. The scorecard looks at your business from four directions; finance, internal, innovation and customer. From this vantage point the company can develop a strategy as part of their operating plan.  These plans are meant to help a company achieve its goals.  If a plan cannot be agreed upon and effectively executed, a business cannot effectively reach its goals.

In this class, you will learn the ins and outs of this valuable tool, and the costs we pay in our business when we fail to execute our plans for success in our market.

The work in a Service Business within the Construction Equipment Industry is complex and filled with details. It is within this environment that our employees work day in and day out. These people who I call your “heroes” are the warriors that make your business a success.

The technicians have a forward workload that leaves little room for inefficiency or ineffectiveness. In the shop or the field whether for repair or maintenance or rebuilds the work never ends. Your “heroes” do incredible work keeping up with this activity. They work in difficult working conditions, they deal with specialized equipment and tooling, they do inspections, prepare equipment for sale and make ready equipment for rent and lease. They get to the end of the day and take a deep breathe to indicate that they made it through another day. They deal with the Art of the Possible every single day.

In this class we will explore the major pillars that comprise your business; Buildings, Inventory, People, Technology, Purchasing and Employee Development. We will then apply and show you how to apply the Art of the Possible.