Posts

Do You Really Need PRODUCT SUPPORT PSSRs, or CSAs?

Do You Really Need Product Support PSSRs, or CSAs?

Guest writer Bill Pyles shares all the ways we really do need Product Support SRs or CSAs.

Most larger equipment dealerships have a robust PSSR (Product Support Sales & Service Rep), CSR (Customer Support Representative) or CSA (Customer Support Advisor) that has been in the making for years. This group of Product Support men and women are an integral, value-added, sales and profit generating part of the entire dealer organization.

But maybe you’re a smaller dealer and looking to get to the next tier of the Product Support ladder. 

This blog is for you!

The CSA acronym is my personal favorite as I truly believe the words customer support advisor best describes the position. The CSA is the direct link between the dealer and everything Product Support related. A well-trained CSA offers the options that meets the financial and equipment requirements of the customer. Should a failed engine be repaired, rebuilt, or replaced? Is the machine a production machine or a backup? Is the machine scheduled to be sold out of the fleet within the next six months? While the machine is down, are there any other critical areas of the machine that need inspected and repaired before going to failure? Customers get very angry when a leaking final drive went to complete failure, resulting in a machine down situation just after leaving your shop.

If your dealership sells and services tracked type equipment (excavators, dozers and tracked loaders) I know your aware the largest cost of ownership is the undercarriage. The undercarriage is a system into itself. Your CSA should have a complete understanding of the undercarriage system. A simple proper track adjusting discussion with the customer demonstrates a knowledge that will save him dollars and downtime. Getting a customer maximum undercarriage life will save thousands of dollars over the life of the machine. 

You’ll also need a good machine population file. It’s tough to forecast sales not knowing your opportunity. A good machine population file will identify the aging, location, and hours on the equipment. By the way a good population file is beneficial to sales, many machines are removed from the fleet after so years and hours. New sales opportunities!

Typically, the 80/20 rule is the typical CSA customer list. The top 20 customers assigned to a CSA typically take of 80 percent of their time and resources. Dealers will need to develop the unassigned fleet customers and the “middle segment”, customers who have your equipment but do not purchase any parts or services.

You’ll need an annual CSA meeting to discuss trends, sales forecast, changes in the market and to celebrate over and above accomplishments (just picture your last whole goods sales meeting).  Is the GM or dealer principle attending? The GM and or dealer principle must make an appearance to show support and comment on the current business environment and congratulate the high performing CSA’s. A well-developed CSA program will give you much to celebrate!

But who does the CSA report to? The dealer principle? 

I once worked for a regional vice president who upon returning from an executive meeting was convinced, we should terminate the CSA program, all of it, today, now.

This executive meeting was held during one of the severe cyclic downturns in heavy equipment sales. Dealers were struggling to survive and expense control was job one. Elimination of the CSA program would save accelerating expense dollars. His rational was simple, if severely flawed. We have a good product and if a customer experiences a failure, he will simply pick up the phone and call us. And with our new snazzy web site, the customer will simply log on and make arrangements for needed parts and or service. After thinking this over maybe for 60 seconds I countered with the elimination of the whole goods salesmen using the exact same logic; we sell good equipment and if a customer needs a new machine or a long-term rental, he will simply pick up the phone and call us. Fortunately, neither plan was put into action, we survived the downturn and came out stronger on the other end.

The sales manager? Maybe not a good choice as the sales manager has enough on his plate with inventory, inventory aging, salesmen, OEM programs, order windows, financing and fleet deals. A CSA reporting to the sales manager may turn into a delivery driver for a bucket, gathering hours for a trade in or running out docs to be signed.

The parts manager? Maybe not a good idea as most part managers are outstanding at managing their inventory, over the counter fill, stock orders, counter activity but not managing a parts and service sales person.

The service manager? Not here either. Service managers have many balls in the air dealing with shop service, field service, training, warranty, the pothole in the parking lot (a little sarcasm) OEM’s and technicians. Not much time to manage a CSA. 

A CSA without a direct supervisor soon becomes a “floater” or Product Support orphan employee.

A better solution would be a Product Support Sales Manager or a position with a similar title. This person would have 100% accountability for a successful CSA program. He or she would work closely with parts and service management in writing CSA goals that are in alignment with company goals. The Product Support Sales Manager would do the CSA’s bi-annual and annual performance reviews as well administer incentive plans and salary increases, create annual sales forecasts and work closely with the OEM representatives regarding OEM Product Support programs.

A Product Support Sales Manager is the mentor, manager, and coach in developing a CSA. CSA’s must have a career plan with defined goals in sales and service activity. I worked at a dealer who had an outstanding Product Support Sales Manager, super high energy. I truly believed this man could inspire CSA’s to sell snow plows in Miami Florida! 

A CSA MUST participate in technical training for the products the dealer represents as well as management level training in negotiating skills and people skills. A successful CSA will have a basic understanding of oil sampling, why on time PM’s are important and an excellent understanding of repair, rebuild or replace options. These skills development can be better managed by a qualified Product Support Manager who reports directly to the dealer principle.

CSA Vehicle: Car or Pickup Truck.

I’ve had responsibility for CSA’s and have experience with both the CSA company vehicle being a car or truck; pros and cons for both. If you give your CSA a car allowance and he or she uses their personal vehicle, you’ll soon find the car parked and a company truck “borrowed” for the day to run out some rebuild pumps and a cylinder or two. Car allowance or not, the CSA will be reluctant to damage or have spilled oil in the trunk or floor. In my opinion a pickup truck sporting the dealer’s name and logo is your best choice. Graphics today look sharp on the job site and rolling down the highway. And when on site, if there is something that the CSA can help out by running something back to the shop, it will not be a problem. However, you’ll want to avoid your newly minted CSA into becoming a parts runner. I do suggest that when a CSA plans his day, he or she will check with will call to see if there are some parts he can bring out and check the service WIP (Work In Process) to see if the customers he’s calling on today have any equipment in the shop and get the status, the customer will ask, be prepared!

CSA Salary & Expenses

CSA salary and expenses are usually split 50/50 between the parts and service departments. I’ve heard arguments that a CSA will sell more parts than service and parts should pay more of the percentage. Most CSA programs are salary and commission based. Another responsibility of the Product Support Sales Manager.

But keep in mind, a dealer’s best margin comes from labor sales. It’s the responsibility of the Product Support Sales Manager to steer the CSA into higher labor sales. If a customer needs a reman engine and the CSA provides a quote for the reman engine, the labor to do the remove and install must be included. I think Michael Jordan once said he missed every shot he did not take. The same applies here; don’t quote the labor and you surely will not get it. Your competitors may be quoting the same reman engine AND the labor. The customer likes the turnkey repair and asks your competitor when they can start. Always provide a professional estimate/quote and follow up with the customer. Add value and close the deal!

Customer Support ADVISOR

When I was a newly minted Product Support Sales Manager, I thoroughly enjoyed customer visits and scheduled customer meetings. I’d wait for an opportunity to ask the customer if a recent issue, wrong parts, late service call, etc. he brought up was discussed with his CSA (I did not use the CSA’s name). If the customer replied “oh you mean the guy who measures our tracks” then we’ve failed to make the ADVISOR relationship with the customer. A good gap we need to close. CSA’s need to listen when the customer talks and suggest solutions to equipment problems. I know we’re providing value when the customer asks the CSA “what do you think?” When the customer says those words, the rest is up to you to deliver the outstanding Product Support that makes you the “go-to” dealer!

Did you enjoy this blog? Read more great blog posts here.
For our course lists, please click here.

Skills Assessments – An Update

Skills Assessments – An Update

You might have noticed we have refreshed our Learning Without Scars web site. This the first phase of the changes we have planned. The goal of this phase was simplification. At the bottom of the landing page there are two symbols; One is a question mark and the other is a graphic of a computer terminal. The question mark denotes our assessments.

Due to the wonderful response we have had from many of you, we have expanded our assessment offerings. We now cover most of the job functions in the construction industry.

In the Parts Business we cover:

  1. Counter and Telephone Sales
  2. Parts Office
  3. Parts Warehouse
  4. Inventory Management
  5. Purchasing and Expediting

In the Service Business we cover:

  1. Foremen
  2. Inspectors
  3. Lead Hands
  4. Service Office
  5. Technical Communicator

In Sales and Marketing, we cover:

  1. Product Support Selling
  2. Product Support Sales Back Office
  3. Parts and Service Marketing

In Leadership we cover:

  1. Parts Management
  2. Service Management
  3. Product Support Sales Management

And for Technicians we cover:

  1. Construction Industry Technician
  2. Rental Industry Technician

You will also notice there are two columns on the right-hand side, one for Spanish and the other for French. We have eight assessments available for both languages. Go ahead and “Click” on the Question Mark on the bottom of the page, or the Assessment tab on the banner, and explore what we have to offer you on assessments.

Oh, and by the way, you can register and pay and get started online now. You don’t even need to talk to anyone. Of course, if you do, we are here waiting.

The Time is Now.

Confessions of a Service Manager ~ Bill Pyles

We are introducing a new area for our blog. We are asking experienced Industry professionals to write on a subject that they think would be of interest to our followers.

Today, I am introducing Bill Pyles. Bill has 40 plus years in the OEM product support arena.

He worked for Caterpillar, Komatsu and John Deere dealers in various locations across the USA.

He has worked most, if not all, positions in Product Support from technician to Executive.

He still is actively engaged in the business and still thoroughly enjoys being a part of the equipment industry and looks forward to every new day.

Bill has been married for 42 years to his wife, Diana, and has two sons that are currently working in the OEM dealer world, one with a Cat dealer and one with a Deere dealer.  He is also fortunate enough to have five grandchildren.

Bill is also a U.S. Marine Corps veteran. Semper Fi.

I hope you enjoy, as I do, reading Bill’s thinking on a wide range of subjects over the weeks and months ahead. Welcome, Bill.

The Time is Now…

Confessions of a Service Manager

I’ve been working in Product Support most of my life.  Most of those 30 years have been primarily focused on service department product support.  I spent time as a shop mechanic, field mechanic, shop foreman and service manager.  I learned a lot during those years.  I learned:

  • How to move labor and material around on a work order to make the times look good.
  • How to avoid any lost time by charging time to sales, rentals, and used equipment.
  • How to handle warranties by sending a less-than-qualified mechanic because “it’s warranty” and it would be “good” training: and what the hell, the manufacturer is paying for it.
  • That if the boss’s hot button was “reduce training” or “reduce expenses,” you simply moved that time to building maintenance or repair of shop tools.  If expenses were high, you shifted them to cost of sales.
  • The importance of taking care of my customers first by letting the sales department wait and wait and wait.
  • That a two-week backlog was good: hey, three weeks was better.  Keeping this backlog ensured I would make my numbers for the month.  The customer would wait.
  • That you never sent work to another branch or even asked if another shop was slow.
  • That if I had a big job, I never called another store for help to take care of other jobs.  Remember the “backlog.”
  • There was never enough time in the day, so when vendors delivered oxygen and acetylene bottles, bolts, nuts, shop supplies there was no need to check the delivery before signing the delivery ticket.  Nothing ever “falls off the back of the truck.”
  • That sales, rental or used equipment never received any warranty on shop or field repairs.  Remember the “budget.”
  • How to sandbag monthly sales.  If we meet budget this month, hold off any more billing until next month.  I have a budget to make then, too.
  • Never to call a customer for additional work a machine needed, while the machine was down.  He’d yell at me if I suggested additional work needed to be done.  It was always easier to say nothing and if the machine failed after it left the shop, he’d call me.
  • If a machine was coming in for a final drive repair, I’d order ever nut, bolt and gear and air freight them in.  I might need them and if I don’t, the parts department will just put them back on the shelf.  No big deal.

During those times, life was good.  My numbers looked good.  I had a backlog, and the boss was off my back.

Then I became a Manager.

Then I became a General Service Manager and was included in management meetings I never knew existed.  I discovered there were other departments challenged to be efficient and profitable – just like me – and unless all departments worked together, it would not happen.

  • It took a little while, but I began to realize why the sales manager was not always so willing to let me have a loaner for a service job I screwed up.  Those labor hours I was writing off to sales, rental and used were actually showing up on his P&L!
  • Those new, used and rental machines were expensive assets that I kept putting to the back of the schedule so I could take care of my customers.  I didn’t know the company was missing opportunities and thousands of dollars because we had no machines to rent or sell.
  • I learned warranty training was expensive.  Those dollars actually came back in the form of warranty expense.  You mean the manufacturer didn’t pay for 10 hours of labor to replace a fuel filter?
  • I discovered the time I invested swapping labor and material around did nothing for the actual bottom line.  What?  I spent hours doing that!
  • I learned a backlog was good but a satisfied customer was better.  I’d visit customers and ask why he sent a machine to another company.  Usually the answer was “Bill, you guys do good work and I don’t mind even paying a little more for good work, but I can’t wait three or four weeks every time my machine goes into the shop.”
  • So I learned to work the overtime when required.  I learned to ask other shops for help and sometimes I even suggested the customer send the machine to another branch that could get him in and out the quickest.  SOmetimes I even offered to pay the additional hauling to get him there!
  • I learned things do “fall off the back of a truck.”  Have you ever been offered a deal too good to be true?  Hey, it fell off the back of a truck.  I went through an audit after the company decided to change oxygen and acetylene vendors.  The vendor came in and did an audit on all the bottles we rented over the years.  We could not come up with $6,500 worth of rented bottles.  They must be lying all over America’s highways.
  • I learned if I didn’t contact a customer for needed additional work, the machine would leave the shop (“Hey, I did what he asked!”) and would fail soon after – on the job.  The first thing I’d hear would be, “It just left your %#@*&% SHOP!” – and I should have called him and fixed it then.
  • I learned that the boatload of parts I ordered for the final drive repair and returned to parts created a lot of expense.  No one told me there were shipping and emergency charges, and we didn’t stock the part because there was no demand.  I learned those expenses were showing up on the parts manager’s P&L.
  • I found out someone had to take the time to do the parts entry, place the order, receive it into inventory, carry it to the shop, pick it up after I returned it and create another return ticket.  They they’d create a location in the warehouse (remember, we did not stock it), and let it sit until the next authorized parts return when the company might get 50 cents on the dollar!  Wow, no wonder when I asked for help on a disputed service invoice, I’d get a cold stare from the parts manager.

The Old and the New

My point (yes, there is a point to all of this) is there are two types of service management – the old and the new.  The old type will not survive at today’s distributorship.  Managers who think like that are being replaced with managers who are concerned with the entire company’s health, not just the service department.

The new service managers are discovering that working together – sales, parts and service – makes a much more enjoyable job.  Time spent hiding expenses rather than addressing the issue is a complete waste of time.  The real cause of the expense is never removed or identified and swapping time becomes routine and a drain on your time.

Direct and constructive communication with other department managers is key to making our company successful, profitable and raising customer satisfaction.  Believe it or not, it starts with the service department!

You can connect with Bill on LinkedIn at  www.linkedin.com/pub/bill-pyles/12/a24/7ab