Webinars

/in , , /by

Don’t forget. Dont’ miss this opportunity.

Two webinars on Service Management Monday

Two webinars on Service Managment Tuesday

You can register at www.rjslee.com under the Learning tab.

I look forward to having you with us.

A Customer Service Tool

/in , , , , , , /by

VoIP – voice over internet protocol. What a name. Well what it does is quite remarkable. This is where your computer drives your phone system. A call comes into your Company and the computer directs the call to the appropriate extension while at the same time it paints your computer screen with the pertinent information from your name and address on the customer. Not only that, it can delivery almost whatever information you want.

“Hello Dave, how are you? Wow, we haven’t spoken since last October, where have you been?”

“Hi Dave, congratulations on your anniversary, how many years has it been?”

“Dave I have been meaning to call you, congratulations on your recent purchase of our “xx” machine.”

I am sure you can imagine various pieces of information that you would like to have displayed before picking up the telephone. There is a machine in the shop, or there is backorder outstanding – pretty critical information that would help you in your discussion with the customer.This is similar to the “Vonage” service that runs through your cable. Contact your dealer business system provider or your telephone system provider and ask what is necessary for you to obtain this type of tool. It will give you a terrific tool for customer service. The time is now.

Friday Filosophy

/in /by

Friends are angels who lift our feet when our own wings have trouble remembering how to fly.

It is not what happens to you but how you respond to what happens to you

No one has ever made himself great by showing how small someone else is.

You CAN make a difference

/in , , , /by

A number of years ago, 2005 to be precise, Ken Blanchard and Barbara Glanz published a short book called “Johnny the Bagger.” It is based on a story than Ms. Glanz used in her talks. Her signature, for her customer service talks, was a room surrounded on all sides by colorful posters. She told stories about customer service examples in business and had highlights on the colorful posters.

One of the stories started with her receiving a call from a front line employee from a supermarket. She had spoken to the supermarket in the previous month. The call came from a 19 year old bagger named Johnny. Johnny told her he had Down’s Syndrome, he was proud of it, and that he didn’t think that he could do much to impact customer service. Then he told her about an idea he had.

He said that when he would come home from work he would think of saying he liked and if he couldn’t think of one he would make one up. With the help of his father he would write the idea on a piece of paper 6 times and each night they would print off 50 copies. He cut out each quote and wrote his name on the back.

When he got to work he put the slips in a bag where he worked and put one in teh customers each bag after he had finished packing up the groceries for them. Isn’t that fantastic? My wish for each of you is that you have a wonderful weekend and that you can each find such an idea to influence the people in your world on a daily basis.

A month later the Store Manager called Barbara. He told her a story. He was making his rounds one day and noticed that one of the lines at the checkout stand was three times longer than any other. He called for more cashiers. But no one moved from the line. He started asking and they told him they wanted to get Johnny’s thought of the day. Well as you can imagine the concept spread and before you knew it customers were being pinned with flowers that could not be sold. A Snoopy decal was used at the meat stand. All kinds of things happen.

It is many times the smallest things that can sometimes make the largest impact. Are you able to think of something that would influence your world as significantly? The time is now.

Shamelesss Promotion Part 2

/in , , , , , /by

IT’S NEVER TOO LATE TOO LEARN!

We will be conducting 2 classroom seminars you won’t want to miss in Dallas:

Parts Management – Unit I

What it Looks Like When it is Right
March 19th and 20th, 2012

Service Management – Unit I

What it Looks Like When it is Right
March 21st and 22nd, 2012

For complete information:-

Check out website www.rjslee.com

Or go to www.aednet.org/seminars.

Contact; Pat Novak at 630-468-5135 or pnovak@aednet.org for answers to your questions

Shameless Promotion Part 1

/in , , , , /by

IT’S NOT TOO LATE TO GET ABOARD!

We will be presenting 4 webinar topics you won’t want to miss next week:

Service Management

Inspections
March 5, 2012; 11:00 a.m. to 12:00 noon CDT

Work Order Process
March 5, 2012; 2:00 p.m. to 3:00 p.m. CDT

Labor Rates
March 6, 2012; 11:00 a.m. to 12:00 noon CDT

Service Organization
March 6, 2012; 2:00 p.m. to 3:00 p.m. CDT

Go to www.rjslee.com for information under the Learning tab

                                                            OR

For complete information on all AED events go to www.aednet.org/seminars.

Contact; Pat Novak at 630-468-5135 or pnovak@aednet.org for answers to your questions

Tablets, PDA’s and Laptops

/in , , , , /by

Over the years we have collected labor to apply to work orders in a myriad of manners. We started from an attendance time card which the mechanics completed at the end of the day telling us what times they worked on which jobs. Then we moved to individual job time cards while still retaining an attendance time card for payroll. Then some of the companies got racy and had only one time card which fed work in process but was data entered to the payroll system. Can you imagine? Then we had one card feed both systems – think of that some efficiencies arriving. Finally technology showed up and we had scanning devices either hand held or bar code scanners to record time. A long road travelled over forty years.

The objective is still the same isn’t it? We need to collect time against a job so that we can update standard job times, record time to create an invoice for the customer and provide an entry into the payroll for the technical so they can be paid.

So now we have laptops and tablets and PDA’s. And each of these devices can be used to collect labor information.

So why not take the leap and get labor entered by the technician and give them a device with which they can place their own parts orders? I have no idea why we can’t get this done. So contact your business system supplier and tell them you want the technician to be able to use a laptop or a tablet, an iPad, Galaxy or any Android device or a Thinkpad Tablet, like I use, any of which can be connected to the internet to have access to the electronic parts catalogues and service documentation. They can get that done for you. Then both you and the technicians will be much further ahead than with what you are using today. The time is now.

The Most Important Part

/in , , , , /by

The first article I wrote for an Industry publication I called “The Only Part That Matters.” This is of course the part that you don’t have available.

I was referencing the fact that too often we are driven by metrics. Off the shelf availability has to be more than 90% of some such number. That is all well and good – but what about the 10% that you are programming yourself to accept?

Early in my career I got a call in the wee hours on a Sunday morning. It was the Vice President of Parts and Service. There was a Department of Defense station in the Arctic that needed a part for their source of power – a Caterpillar Engine. Of course we didn’t have the part. We found the part in Europe. We sent an employee on a plane to go and get it, bring it back, and then we shipped it to the customer. That gentleman’s name was Rod Boileau and although most of you won’t know Rod he is one of the men that I blame for continuing to be in this Industry some 42 years later. He provided a lesson I have never forgotten. He said “if the part you don’t give me keeps my machine down – you have given me zero.” And this simple example made his point. No part – no power – no power death.

Ever since I have been harping on the fact that no matter what you goal is for off the shelf service you are programming yourself to accept to tolerate a level of shortages. That is why my first rule in the parts business is to find every part every day before you go home. No it is not acceptable to place the part on a backorder at a supplier but you need to know that the part is available and can be shipped that day. That is parts availability. The time is now.

Maintenance

/in , , , , , , , , , /by

Over the years more and more people have realized that maintenance on a piece of capital equipment is one of the more critical activities to conduct to reduce the owning and operating costs of that piece of equipment. This is true for your vehicle or washing machine just as much as for your machine.

There was a sudden recognition some time ago that the “customer” didn’t really appreciate how important maintenance was in extending the useful life of that machine. They felt, in many cases, that maintenance was simply dropping fluids and changing filters. As most of you know it is far more than that. Along with this recognition the various suppliers started to make it easy for the customer to maintain their machinery. They sold maintenance agreements and extended warranties offering the customer piece of mind and a reasonable price. But there still remained one serious stumbling block – Service Management.

Yes, in many cases, the Service Managers are in the way. You see they are very busy people. They don’t have enough people in their organization to support the current service workload. This service organization is a subject of one of our webinars next week. Check at www.rjslee.com under the learning tab for more information.

I am struck by the fact that everyone knows how to run a parts department or a service department except of course the people that actually do run the parts departments and service departments. This is one of the major challenges facing management in equipment dealers. How do we get professional management into parts and service when we don’t have sufficient respect for the work that is being done in these departments?

A new discussion on market share

/in , , , , , , , , , /by

Al Wiley, an executive of Xpectmor, sent us a comment on our recent Market Share post. He says that “market share is the definitive measure of customer satisfaction.” Of course he is right. The measure of market share, however,  is what causes the dilemma for many of us.

In the equipment market it is reasonably easy to define market share. There are a finite number of transactions and everyone knows what everyone got. For instance, we have five different suppliers in the market with sales last month. Supplier #1 got 4 sales, supplier #2 got 1 sale, supplier #3got 2 sales, supplier #4 got 2 sales and supplier #5 got 1 sale. The market share is a simple matter of arithmetic. Supplier #1 got 40% market share and so on.

With the parts and service business it gets more complicated. The various suppliers into the market don’t know what the other suppliers sold during any particular period. So how can we possibly calculate the market share of any particular supplier? That is why there has not been any real definitive publication for market share.

When I first started in the Industry in the late 1960’s some suppliers used to conduct a personal survey with each and every one of their customers worldwide. Can you imagine the time and cost for such a survey? Well they did them and they published the results within their distribution network. It was not precisely accurate but it was a very good indicator of where you stood as a dealer in parts and service market share.

As more and more machines get GPS equipped and the dealers/distributors, manufacturers and customers become more adept at understanding telematics and their use we have a terrific opportunity. We can calculate what the consumption of parts and service “should” be on a machine.

This is the first problem. The customer doesn’t always follow the recommendations of the manufacturer of the machine for the maintenance intervals nor the maintenance items to be dealt with for a particular service. Similarly when it is obvious that a repair should be made with a “new component” sometimes a repair that I call “bubble gum and band aids” will be performed. You might be wondering why this is important. Well it is due to the fact that all we can do is calculate the “potential” consumption of parts and service for a particular machine in a specific application running a specific number of hours. It is this potential that we have to use to calculate our “market capture” rate. See now we change the word. It is no longer market share it is market capture.

The dealer captures the potential business based on their actual sales of parts and service. Once we have these facts nad have them for a sufficient period of time we can make a clear statement about capture rates are the success and/or failure of the particular strategy that a dealer is following. The time is now.